JR Direct Radio XP662 User Manual download pdf (Page 35)

CHANNEL

SCROLL

INCREASE

DECREASE

ENTER

XP662 MANUAL Airplane

Dual rate is available for the aileron and elevator

channels. The purpose of this function is to allow for

in-flight selection of two preset servo travels for each

of these channels. The amount of travel is adjustable

from 0-125%. The factory settings for both switch

positions (0 and 1) is 100%. Either position may be

selected as the low or high rate by placing the

switches in the desired position and adjusting the

value for that position. Operation of these switches

is described in Section 6.3.

Different types of maneuvers require varying

amounts of control movements. Snap rolls require

large control movements, while smooth maneuvers

like long slow rolls are best performed with smaller

control movements. Dual rates allow you to change

the control movements in flight at the flip of a

switch. This allows you to execute maneuvers

requiring both radical control movements and small

control movements during a single flight.

1. Turn on the transmitter.

2. Press the SCROLL and INCREASE buttons

simultaneously to enter the function mode.

3. Press the SCROLL button until “D/R” appears on

the screen.

4. Press the CHANNEL button until the desired

channel appears on the screen (AI = aileron or

EL = elevator).

5. The number that appears directly to the right of

the selected channel is the switch position. There

are two switch positions, 0 and 1, for each of the

channels. An “0” will appear when the selected dual

rate switch is in the uppermost position and a “1”

when the selected switch is in the lower position.

6. To change the switch selection you must enter

the dual rate switch selection function in the

system mode (see Section 6.3).

7. The number in the center of the screen indicates

the current dual rate value for the selected

switch position and channel. Press the

INCREASE or DECREASE button to adjust the

dual rate value (0–125%).

8. After adjusting the value for the 0-switch

position, change to the 1-switch position and

adjust the rates.

9. Press the CHANNEL button to select the other

channel and adjust the dual rate value for both

switch positions.

10. Press the SCROLL button to access the

Exponential Rate feature.

11. To exit, press the SCROLL and INCREASE

buttons simultaneously.

DUAL RATE

7.2

SWITCH POSITION (0 OR 1)

DUAL RATE VALUE (0-125%)

D/R

AIO

I00

INDICATES THE DUAL RATE FUNCTION

CHANNEL

AI : AILERON

EL : ELEVATOR

Accessing the Dual Rate Function

CHAPTER 7: FUNCTIONS (FUNCTION MODE)

•

Airplane

Press the SCROLL button until

“D/R” appears on the screen.

Press the CHANNEL button until

“AI” or “EL” appears on the screen.

Press the INCREASE or DECREASE

button to adjust the dual rate value.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 87 88

Comments to this Manuals

No comments

JR Direct Radio XP662 User Manual Page 35

Comments to this Manuals