JR Direct Radio XP662 User Manual download pdf (Page 5)

XP662 MANUAL Introduction

QUICK START

AIRPLANE

Model Type Selection

Servo Reversing

REV

◆

NORM

THR

CHANNEL

SCROLL

INCREASE

DECREASE

ENTER

TYP

9.7V

ACI

TYP

In this manual you will find in-depth instructions that

detail all the steps and procedures you should follow in

order to program each of the XF662’s features. For

modelers who want to get into the air fast, we have

provided Quick Start. Quick Start covers the basic

programming information necessary to get you airborne.

Later, when you want to learn more about specific

features of the XP662, turn to the appropriate page(s) in

this manual for more detailed programming information.

If AC appears on the screen procede directly to

Step 4. If HE appears press the INCREASE or

DECREASE button until “AC” appears, then

press the SCROLL and INCREASE buttons

simultaneously to store the model type change.

Press the SCROLL and INCREASE

buttons simultaneously and hold

while turning on the transmitter.

Press the SCROLL button until

“TYP” appears on the screen.

Turn the transmitter off and then on again.

Digital Trim Settings

Check to ensure that the aileron, elevator, and

rudder trim values are set to the 0 (neutral) position.

Next, set the throttle value to the full low (-40)

position by pressing the throttle trim lever down.

1 2

3 4

With the transmitter on, press the

SCROLL and INCREASE buttons

upward simultaneously until a

beep is heard.

REV

◆

NORM

THR

CHANNEL

SCROLL

INCREASE

DECREASE

ENTER

Press the SCROLL button (if necessary)

until “REV-NORM” appears on

the screen.

REV

◆

NORM

THR

CHANNEL

SCROLL

INCREASE

DECREASE

ENTER

Press the

CHANNEL

button to select

the channel you

want to reverse.

Press the INCREASE or

DECREASE button to

reverse the direction of

the channel you selected.

1 2 3 4 5 6 7 8 9 10 ... 87 88

Comments to this Manuals

No comments

JR Direct Radio XP662 User Manual Page 5

Comments to this Manuals