JR Direct Radio XP662 User Manual download pdf (Page 47)

CHANNEL

SCROLL

INCREASE

DECREASE

ENTER

CHANNEL

SCROLL

INCREASE

DECREASE

ENTER

XP662 MANUAL Airplane

1. Press the CHANNEL button once until “MIX A”

appears, with the mixing value located at the

bottom of the screen.

2. To set the Slave Channel’s mixing value, move

and hold the Master Channel control stick to the

direction to be adjusted (up/down—left/right),

then press the INCREASE key to add positive

mixing, value, or the DECREASE key to add

negative mixing value (+/–125%). When the

master channels stick is moved, the display will

automatically show the mixing value for the

current stick direction.

Note: If a mix switch position other than on is

selected, it will be necessary to move the selected

switch to the on (or active) position to adjust the

mixing value. “OF” will appear on the screen if the

selected mixing switch is in the off position.

The purpose of the mixing offset feature is to

redefine the neutral position of the slave channel to

be mixed. Any desired position may be selected for

the offset reference point. To set the offset position,

place the master channel’s stick to the desired

position and press either the INCREASE or

DECREASE keys.

This position is now stored in the memory and its

offset value from the neutral position of the master

channel is indicated numerically on the LCD display.

Then, the mixing value at the determined offset

position is now set at 0.

PROGRAMMABLE MIXING (A,B,C) (continued)

7.10

A24

Press the CHANNEL

button once until “MIX A”

and MIX value % appears

Press either the INCREASE or DECREASE

buttons to increase/decrease mixing value.

CURRENT MIX MASTER CHANNEL

SLAVE

CHANNEL

CURRENT

MIXING

VALUE

MIX

A24

Press the CHANNEL button until

“OFFSET” appears on the screen.

Press either the INCREASE or

DECREASE buttons to slave the

offset position.

OFFSET MIXING

VALUE

MIX

OFFSET

Mixing Value Adjustment

Mixing Offset Adjustment

Accessing the Offset Function

CHAPTER 7: FUNCTIONS (FUNCTION MODE)

•

Airplane

1. Press the CHANNEL button once until offset

appears in the center of the screen.

2. Place the master channel stick to the desired

position of slave channel offset, then press either

the INCREASE or DECREASE button to store.

3. Press the SCROLL button once to access

Program Mix B, press twice to access program

MIX C, and a third time for servo reversing.

4. To exit the Function mode, press the SCROLL

and INCREASE buttons simultaneously.

Note: If a mix switch position other than on has

been selected, it will be necessary to move the

selected switch to the on or active position to set the

offset value. “OF” will appear on the screen if the

selected mixing switch is in the off position.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 87 88

Comments to this Manuals

No comments

JR Direct Radio XP662 User Manual Page 47

Comments to this Manuals