JR Direct Radio XP662 User Manual download pdf (Page 44)

XP662 MANUAL Airplane

CHAPTER 7: FUNCTIONS (FUNCTION MODE)

•

Airplane

When the flaps are deployed, most airplanes exhibit

pitching tendencies (most pitch nose up). Elevator

offset trim is designed to prevent this pitching. Flap

to elevator offset trim automatically retrims the elevator

to a preset value when the flap switch is activated.

Note: Flap-to-elevator offset trim is also useful as a

dual elevator trim even for airplanes without flaps. This

is especially helpful for sailplanes that require one trim

setting for launch and another trim setting for flight.

1. Turn on the transmitter.

2. Press the SCROLL and INCREASE buttons

simultaneously to enter the function mode.

3. Press the SCROLL button until “OFFSET F-E”

appears on the screen.

4. Press the INCREASE or DECREASE button to set

the desired amount and direction of the elevator offset.

Note: It is helpful to have the flap switch on

when making this adjustment.

5. Press the SCROLL button to access the

Programmable Mix function.

6. To exit, press the SCROLL and INCREASE

buttons simultaneously.

Accessing the Flap-to-Elevator Offset Trim Function

FLAP-TO-ELEVATOR OFFSET TRIM

7.9

OFFSET

F-E

ELEVATOR OFFSET VALUE (±125)

INDICATES FLAP-TO-ELEVATOR

OFFSET TRIM FUNCTION

CHANNEL

SCROLL

INCREASE

DECREASE

ENTER

Press the SCROLL button until

“OFFSET F-E” appears on the screen.

Press the INCREASE or DECREASE button

to adjust the flap-elevator offset value.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 87 88

No comments

JR Direct Radio XP662 User Manual Page 44